Here is a good example of an electric fence installation using our Electro-Fence™ technology.
Key Points Of The Project
- Location: Secure vehicle compound in Scotland
- Installer: An approved member of our international network of electric fence installers who was trained by Advanced Perimeter Systems Limited.
- Client’s Requirement: To keep intruders out of the compound with an effective alarm system.
- Site Characteristics: Existing metal palisade fenciing (2.4m high) with access gates on the compound perimeter.
- Height of the electric fence on completion of installation: 3m
Key Steps Of The Electric Fence Installation
(click images to enlarge)
A section of the existing palisade fence prior to the electric fence installation.
A lot of vegetation had grown through the fence over time. This had to be removed and cut back before the installation could begin.
Palisade fence with the vegetation removed.
Electro-Fence™ intermediate insulators were first fixed to intermediate posts.
Then the posts were attached to the fence. It is easier to fit the electric fence insulators in this way.
The installer begins to fix the first of the electric wires.
Wires are installed from the top down.
With the first electric wire installed, the installer begins on the second set.
Picture shows two electric wires installed.
Installer begins on the third set.
Installer busy attaching the fourth set of electric wires.
All fence end, corner or any other strain posts have to be extended to the height of the Electro-Fence™ posts in order to take the force of the wires.
They are also fitted with a fence anti-climb feature to stop intruders climbing over. The anti-climb wires will also generate an alarm if interfered with.
The fence should be kept clear of any vegetation at all times. Gravel is an ideal medium for keeping vegetation at bay.
Electric fence installation complete.
Electro-Fence™ extends 600mm above the existing fence to stop intruders climbing over
Electro-Fence™ is a non-lethal electric fence system and carries British Government approvals. It is also BS EN ISO standards compliant and has been installed at many high security sites around the world including military bases, prisons and police compounds.
If you have an existing perimeter fence you can add Electro-Fence™ to improve its security. Alternatively Electro-Fence™ can be installed as a stand-alone fence system.
We have an international network of approved installers and we welcome enquiries from around the world. So wherever you are, please feel free to contact us for a no-obligation discussion about your requirements.